TMA impression coping screws for ADIN implant systems, used to secure open tray and closed tray impression copings to the implant during the impression-taking procedure.

Available Variants:

• Open Tray — Length 14 mm, Diameter 2.1 mm — Long screw for open tray technique; passes through the custom tray and is unscrewed after impression set to retrieve the coping with the impression
• Closed Tray — Length 6.8 mm, Diameter 2.5 mm — Short screw for closed tray technique; coping remains in the mouth and is repositioned into the set impression after removal

Compatible With:

• ADIN Touareg™ S
• ADIN Touareg™ OS
• ADIN Swell™

Indications:

Indicated for use with ADIN TMA impression copings during implant-level impression procedures. The open tray screw is used with a perforated custom tray and is accessed through the tray opening to unscrew the coping after the impression material has set. The closed tray screw is used with a standard stock tray; the coping is removed from the mouth after the impression and repositioned into the impression for model pouring. Always verify screw seating before taking the impression to ensure accurate implant position transfer.